Progress Rail’s Maintenance-of-Way (MOW) division was born out of the movement toward mechanization in the railroad industry and introduced the first Kershaw®Ballast Regulator in 1945. Today, Progress Rail supplies Kershaw®MOW equipment, providing machines to all Class I railroads, transit and short lines and contractors around the world.
The Kershaw®Model 60 Sand Remover is equipped with an articulating sand transfer plow, benching-type sand wings and a broom/conveyor attachment for sand removal from the track area. Articulating sand transfer plow removes sand up to 1.5 meters either side of track centerline. Sand wings remove sand up to four meters either side of track centerline. Conveyor attachment discharges sand from broom at six meters from track centerline. Multi-stage conveyor allows width to be minimized to less than three meters from the track centerline to clear obstructions.
Frame:Welded construction using 4 (101.6 mm) x 12 (304.8 mm) solid steel side members and structural steel cross members.
Weight:50,020 lbs. (22689 kg)
Engine:Caterpillar®C9.3B, 335 hp @ 2200 rpm.
Propel System:Hydrostatic drive, variable displacement piston pump, variable displacement piston propel motor. Travel speed: 50 mph (80 km/hr); Work speed: 12.4 mph (20 km/hr).
Transmission and Axles:Hydraulic propel motor powers a 4-speed “shift on the go” transmission. Dual propeller shafts, two (2) spring-mounted 30,000 lb. (13608 kg) industrial type axles equipped with no spin differential. Equipped with 9 leaf spring suspension. A single control handle controls speed and direction in each range.
Wheels and Brakes:28" (711 mm) cast steel wheels bolt-ed to each axle, external clasp brakes (two shoes per wheel). Service brakes; air applied/spring released. Parking brakes; spring-applied/air released.
Electrical System:24-volt dc negative ground, 150 amp alternator, two 205 amp/hour batteries, color-coded and numbered wiring.
Air System:Air compressor, engine oil lubricated, camshaft driven, water-cooled, 13 ft 3 (.37 m3/min) free air volume @ 1250 rpm. System pressure is 100-120 psi (758-927 kPa), 613 in. 3 (10 liter) air tank. Service brakes are controlled by a pressure reducing valve and the parking brakes by a manually-operated dump valve. System is also equipped with a dual-tone air horn, safety relief valve.
液压系统:Engine-powered pump drive with clutch drives hydrostatic propel pump and pumps for controls and broom. Control circuit includes two pilot-pressure joysticks with electronic keypads, electrically actuated control valves and remote-mounted oil cooler. 100 mesh (145 micron) suction screens and 10-micron return filters. Electric emergency pump to operate selected circuits.
Cab:Extremely roomy cab. Fully enclosed and insulated with safety glass, dome light, dual front windshield wipers, and ergonomic seats. Cab access from either side of the machine. Equipped with self-contained vertical mount sidewall heater/air conditioner. The cab is 75 inches wide (1905 mm) and 88 inches high (2235 mm).
Capacities:Fuel: 122.5 gal (464 liters), hydraulic: 98 gal (371 liters).
Options:V-Type Sand Plow
Randy Chubaty
National Sales Manager - Rail
Fairmont, MN
507-384-2577
Jennifer Kincaid
Sales Executive - Rail
Bradenton, FL
414-369-9290
Corey Helper
National Sales Manager
Montgomery, AL
251-610-6347
杰森船闸r
Sales Executive - Vegetation/Utility
Birmingham, AL
205-492-8006
Sid Harmon
Technical Sales Executive - Vegetation/Utility
Montgomery, AL
334-782-9906
Parts Hotline
1-888-660-5252
Service Hotline
1-833-537-7782
Kirk Schirra
Aftermarket Manager - Sales, Service & Warranty Support
Montgomery, AL
Office:334-387-9301
Cell:814-431-2129
Julian Howard
Sales Manager, Aftermarket Parts
Office:334-387-9426
Fax: 334-387-9400
Cell:334-235-0922
Russell Forks
Service Manager
Montgomery, AL
334-799-4061
Chuck Ewing
Vice President - International Trackwork
+1-219-680-9096
David May
International Sales Director
+1-469-934-8284
Adam Todd
Director, International Business Development
+44 (0) 7966 337924
Luiz Melo
Business Development Manager Latin America
Phone: +55 (11) 4070-5288
Cell:+55 (11) 97019-0338
Rob de Beer
Business Development Manager Australia
+61 (0) 408 010 983